커피 가루 / 원두 혼합 / 녹차 가루 혼합용 식품 분말 가루 혼합기 / 분말 혼합기
문의 : 이진 주방 산업 010-2662-3322로 문의 바랍니다
커피 가루
원두 혼합
녹차 가루 혼합
식품 가루
식품 분말 가루 혼합기
분말 혼합기
이번 분말 혼합기 제작 주문은
울산 광역시 울주군에 위치한 커피 및 tea 전문 업체인 "**티 가든"에서 주문 제작 의뢰
제작 : 120리터용 분말 혼합기
사용 분말 : 커피 (원두) 가루, 녹차 가루 ( tea 종류 )
배송 : 전국 화물 (합짐) 착불 처리 ( 오전 9시 하차 요청 )
배송 완료되었으며 주문해 주셔서 감사드립니다
편리하게 사용하시기 바랍니다
* 120리터용 분말 혼합기
* 260리터용 분말 혼합기
* 두가지 용량의 분말 혼합기만 제작 됩니다
< 꼭! 확인후 주문해 주세요 >
* 혼합기에 50~60% 정도 내용물(분말)을 투입후 가동하셔야 됩니다
* 서로 엉겨붙는 성질인 완전 건조되지 않은 분말 형태는 혼합 불가 합니다 ( 예: 흑설탕,건조가 덜된 고춧가루,액상 투입 등 )
* 360도 회전하여 혼합되는 분말 혼합기이며 회전시 발생되는 미세 파동 및 통돌이 회전 방식으로 인해 혼합이 이루어지는 분말 가루 전용 분말 혼합기 입니다
* 전체 통이 돌아가는 형식이며 속 내부 별도 혼합 장치는 되어있지 않습니다
* 분말 가루 혼합기 입니다
* 식품용 분말 혼합기 ( 스테인레스로 제작 ) 이며 식품 외 분말 및 가루 혼합 용도로 사용 가능합니다
* 구입하고자 하는 업체에서 사용되는 재료의 부피는 저희가 알수 없으므로 몇 kg혼합 가능한지는 알수 없으니 답변 드리지 못합니다
* 구입업체에서는 하단기 혼합기 사이즈를 확인후 충분히 검토후 결정하셔서 주문해 주시기 바랍니다
* 간혹 직접 오셔서 제품을 보시기를 원하시거나 혼합 가능한지 테스트를 원하시는 분들이 계시는데 저희는 주문 제작 완료후 즉시 출고 되므로 오셔서 직접 확인이 불가능 합니다
* 제품 확인은 사진 및 동영상으로 확인해 주시기 바랍니다
* 혼합 가능 테스트는 간단하게 직접 해 보시기 바랍니다 ( 투명한 플라스틱 용기에 혼합할 양을 투입후 흔들어 보세요 )
* 단상 220V
* 분당 18회전 ( 혼합에 적절한 회전 속도 이므로 회전 속도는 조절 불가 합니다 )
* 단상 1/4 마력 / 단상 1/2마력 ( 상업 모터 사용 )
* 타이머 장착 : 시간 타이머가 장착 되어 있으며 사용 업체에서 사용하는 분말 혼합 상태에 따라 적절한 시간 타이머를 조절하여 사용하시 바랍니다
* 세척 및 청소가 용이
* 제작 기간 : 7일 ~ 최대 15일 정도 소요 ( 제작 및 작업 상황에 따라 달라질수 있습니다 )
* 현금 결재 / 카드 결재 불가
* 부가세 별도 / 세금계산서 발행 가능
* 운송비 착불 처리
* 운송 : 전국 화물 ( 합짐 ) 착불 / 직접 운송해 가셔도 됩니다
* 010-2662-3322 주문 및 상담
* 별도 주문 발주서 발송시 : 팩스 ( 053 ) 627-3323 또는 2jineng@naver.com 으로 별도 발주서 보내 주셔도 됩니다
< 분말 혼합기 사이즈 >
* 120리터용 분말 혼합기
총 프레임 : 높이 900mm 길이 1100mm 폭 650mm 중량 60Kg정도
혼합 통 사이즈 : 지름 550mm 높이 510mm
* 260리터용 분말 혼합기
총 프레임 : 높이 1200mm 길이 1420mm 폭 790mm 중량 80Kg정도
혼합 통 사이즈 : 지름 635mm 높이 790mm
< 분말 혼합기 사용 방법 >
1. 분말 혼합기 구입후 깨끗하게 세척후 완전히 건조된 상태에서 사용
* 세척 방법 :
베이킹소다,식초,물을 사용 하여 세척
헝겊 또는 키친 타올에 식용유를 묻혀 닦은후 세척
세제로 세척 부드러운 수세미로 세척후 사용
2. 건조된 분말 혼합기에 혼합할 분말의 원료를 혼합용기에 50~60%까지만 투입후 가동 ( 구입 업체에서 사용하는 원료의 양을 조절하여 투입후 사용 )
3. 분말 투입후 첫 가동시 2~3 분 정도 가동후 정지된 상태에서 혼합 상태를 확인해 본후 적절한 타이머를 입력하여 사용하시면 됩니다
4. 혼합이 완료되면 반드시 정지된 상태에서 혼합된 분말 가루를 받을 용기를 하단부에 놓은 후 혼합통을 기울여 내용물을 받으시면 됩니다
5. 사용후 깨끗이 세척하여 재사용 하시면 됩니다
* 분말 혼합기 하단부 지지대에 브레이크 바퀴가 장착 되어 있으므로 적정한 장소에 브레이크를 채워 안전하게 가동해 주시기 바랍니다
< 자주 묻는 질문들>
1) 몇 kg / 몇 말 혼합이 가능한가요 ?
저희들은 구입하는 업체의 분말에 대해서 잘 모릅니다
밀가루 얼마 설탕 얼마라고 말씀해 주시는데 저희들은 그 부피를 잘알지 못합니다
분말 혼합기에 50~60% 정도 투입후 사용하는 분말혼합기이므로 구입업체에서 신중히 결정하셔서 주문해 주시기 바랍니다
2) 혼합이 잘 되나요 ?
혼합 상태가 궁금하시다면 자가 테스트를 해보세요
* 자가 테스트 방법 : 빈 플라스틱 (투명 음료수 통) 용기에 혼합할 원료들을 한줌 넣어 흔들어 보세요
흔들어서 혼합된 상태를 확인해 보시고 어느정도 혼합이 이루어진다면 저희가 제작하는 통돌이식 회전 분말 혼합기로는 충분히 혼합이 가능할 것입니다
3) 고장은요 ? AS는요 ?
저희가 제작하는 분말 혼합기는 잔 고장없이 수명이 긴 제품임을 장담합니다
다만 사용하는 업체에서 잘 관리를 해주시기 바랍니다
수시로 볼트 조임 확인 , 베어링 관리 등 잘 관리만 해주신다면 오랫동안 사용하실수 있습니다
< 분말 혼합기 사용시 반드시 주의 해야 할 사항 >
1) 360도 회전하는 분말 혼합기이므로 회전중 벽에 부딪힘이 발생되지 않도록 충분히 여유있는 공간에서 가동해 주시기 바랍니다
2) 지지대 하단부에 브레이크 바퀴가 장착 되어 있으므로 브레이크를 꼭 채워서 가동하시기 바랍니다
3) 반드시 평지에서 사용해 주시기 바랍니다
4) 혼합기 하단에 원료 담을 용기를 놓아 둔체로 가동하지 마세요 반드시 정지된 상태에서 용기를 두고 사용하세요
5) 액상을 투입하여 가동하지 마세요 ( 액상 혼합기는 별도 제작 )
6) 사용하는 업체의 과실로 인한 기계 파손시 발생되는 수리 및 기타 비용은 전액 사용업체에서 부담하셔야 합니다
Food Powder Powder Mixer / Powder Mixer for Coffee Powder / Coffee Bean Mix / Green Tea Powder Mixing
Contact: Binary kitchen industry please contact us at 010-2662-3322
Coffee powder
Coffee beans
Green Tea Powder Mix
Food powder
Food powder powder mixer
Powder mixer
This powder mixer production order
Bespoke orders from "Tea Garden", a coffee and tea company located in Ulju-gun, Ulsan
Production: 120 liters of powder mixer
Powder used: coffee (bean) powder, green tea powder (tea type)
Shipping: Deferred payment for national cargo (consolidation) (9 am drop off request)
Delivered and thank you for your order
Please use it conveniently
* 120 liter powder mixer
* 260 liter powder mixer
* Only two powder mixers are available
<By all means! Please order it after confirmation>
* 50 ~ 60% of the contents (powder) should be put into the mixer and operated.
* Powder forms that are not completely dry, which are entangled with each other, cannot be mixed (e.g. brown sugar, less dried red pepper powder, liquid input, etc.)
* It is a powder mixer that is mixed by rotating 360 degrees and is a powder mixer for powder mixing that is mixed due to the micro wave generated by the rotation and the rotation of the through
* The whole barrel is rotated and there is no separate mixing device inside.
* It is powder flour mixer
* It is a food powder mixer (made of stainless steel) and can be used for non-food powder and powder mixing.
* We do not know the volume of the material used in the company you want to buy, so we do not know how many kg can be mixed
* The purchaser should check the size of the lower stage mixer and fully examine it before ordering.
* There are some people who want to come to see the product or test whether it is possible to mix.
* Please check the product pictures and videos
* Do simple mixing test yourself (put the amount to mix in a clear plastic container and shake it)
* Single phase 220V
* 18 revolutions per minute (rotation speed is not adjustable because it is suitable for mixing)
* 1 phase 1/4 hp / 1 phase 1/2 hp (commercial motor)
* Equipped with Timer: Time Timer is equipped. Please adjust the appropriate Time Timer according to the powder mixture used by the user.
* Easy to clean and clean
* Production period: 7 days ~ up to 15 days (depends on production and work situation)
* Cash payment / card payment not accepted
* Tax-included / Tax invoice can be issued
* Shipping fee handling
* Transportation: National cargo (combination) can be paid / shipped directly
* 010-2662-3322 Order & Consultation
* When ordering separately: You can send a separate order by fax (053) 627-3323 or 2jineng@naver.com
<Powder Mixer Size>
* 120 liter powder mixer
Total Frame: Height 900mm Length 1100mm Width 650mm Weight 60Kg
Mix bucket size: diameter 550mm height 510mm
* 260 liter powder mixer
Total frame: height 1200mm length 1420mm width 790mm weight 80kg
Mixing bucket size: diameter 635mm height 790mm
<How to use the powder mixer>
1.After purchasing powder mixer, clean it thoroughly and use it in the completely dried state.
* How to wash:
Wash with baking soda, vinegar and water
Wipe clean with a cloth or kitchen towel dipped in oil
Wash with detergent Use after washing with soft loofah
2. Put only 50 ~ 60% of the raw materials of the powder to be mixed in the dried powder mixer into the mixing container and start operation. (Adjust the amount of raw materials used by the purchasing company.)
3. After the powder is put into operation for the first time after 2 ~ 3 minutes of operation, check the mixing status in the stopped state and enter the appropriate timer.
4. When the mixing is completed, be sure to place the container to receive the mixed powder powder at the stopped state and tilt the mixing container to receive the contents.
5. After use, clean it and reuse it.
* Brake wheels are attached to the bottom support of the powder mixer, so make sure to apply the brakes at the proper place and operate them safely.
<Frequently Asked Questions>
1) How many kg / how many words can you mix?
We don't know much about the powder of the company
You tell me how much sugar, how much sugar, we don't know the volume.
Since 50 ~ 60% of the powder mixer is used in the powder mixer, please decide carefully before purchasing.
2) Is it mixing well?
If you're curious about the mix, do a self test
* Self Test Method: Shake a handful of ingredients to mix in an empty plastic container.
Shake to check the mixed condition and if it is mixed to some degree, the mixing type rotary powder mixer that we make will be enough to mix.
3) What's wrong? What about AS?
The powder mixer we make is a long-life product with no breakdown
But please take care of your company
You can use it for a long time if you take care of bolt tightening and bearing management frequently.
<Precautions when using the powder mixer>
1) Since it is a powder mixer that rotates 360 degrees, please run it in a space that is large enough so that it does not hit the wall during rotation.
2) Brake wheels are attached to the bottom of the support, so make sure to apply the brakes firmly.
3) Please be sure to use on flat
4) Do not operate the container by placing a container of raw material at the bottom of the mixer.
5) Do not operate by adding liquid (liquid mixer is manufactured separately)
6) Repairs and other expenses incurred in the case of machine damage due to the negligence of the company must be fully paid by the user.
2020년 1월 31일 금요일
2020년 1월 29일 수요일
식품 용기,업소용 식품 용기, 스테인레스 용기,식품 전용 27종,SUS 304,대형 국 통
식품 용기,업소용 식품 용기, 스테인레스 용기,식품 전용 27종,SUS 304,대형 국 통
문의 : 이진 주방 산업 010-2662-3322 로 문의 바랍니다
식품 용기
업소용 식품 용기
스테인레스 용기
식품 전용 27종
SUS 304
대형 국 통
식깡
이번 스테인레스 용기 주문은
1) 전라북도 익산시에 위치한 푸드업체인 "**푸드"에서 주문
15GL (60리터) 스테인레스 304 X 4대
15GL용 이동식 발통틀 X 2대
배송 : 대신 택배 착불
2) 부산광역시 해운대구에 위치한 떡볶기 전문 업체인 "*끼"에서 주문
25GL (81리터) 무용접 식깡 X 1대
추가 작업 : 옆면 최하단부에 20A 스텐 밸브 장착 + 앨보 장착 요청
배송 : 대신 택배 착불
주문해 주셔서 감사드립니다
편리하게 사용하시기 바랍니다
* 사이즈별 스테인레스 용기 판매 (201/304/무용접)
* 사이즈별 이동식 발통틀 판매 (스텐으로 제작)
* 스테인레스 용기에 별도 작업 요청 가능 (홀작업,밸브장착 등)
* 하단부에 단가표 참조 바랍니다
< 스테인레스 용기 >
* 스테인레스 용기는 0.8T가 기본 제작 되며 출고시 용기및 뚜껑포함입니다
* 1.2T 1.5T는 별도 제작
* 별도 사이즈 제작 요청시 하단부 단가표에 명시된 지름은 변경 불가이며 높이는 조절 가능합니다
* 제작 기간 : 4~7일정도 소요 ( 제작 상황 및 재고 상황에 따라 달라집니다
* 현금 결재 가능 / 카드 결재 불가
* 택배 착불
< 이동식 발통틀 >
* 이동식 발통틀은 A형식,B형식 중에 택하셔서 주문해 주시면 됩니다 (스텐 4T로 제작)
* 바퀴는 4인치 회전 2 + 4인치 BK 2 장착 됩니다
* 보유하고 계신 제품에 적용시는 하단부 외경 지름을 알려주시면 별도 제작 가능합니다
* 별도 제작 주문시 별도 가공비로 인해 단가가 높다는 점을 알려드립니다
* 제작 기간 : 4~5일 정도 소요 ( 제작 상황에 따라 달라집니다 )
* 현금 결재 가능 / 카드 결재 불가
* 택배 착불
* 택배 운송 완료후 즉시 제품 확인해 주시기 바랍니다
* 확인후 제품 사용이 불가능한 파손이 발생되면 즉시 배송업체에 연락하셔서 조치 하시기 바랍니다
* 배송중 발생되는 파손은 환불 및 교환 불가합니다
< 스테인레스 용기 단가표 >
* 표기된 금액은 스테인레스 용기 단품의 금액입니다
* 부가세 미포함
* 운송료 별도 ( 추가 작업 요청시 추가금 발생됩니다 )
용량 지름X높이 SUS 201 SUS 304
3GL (12리터) 250*265 28,000 42,000
5GL (20리터) 320X285X300 33,000 (무용접)
5GL (20리터) 300*300 32,000 53,000
8GL (28리터) 350*330 38,000 60,000
10GL (37리터) 370X335X390 40,000 (무용접)
10GL (40리터) 350*380 40,000 68,000
15GL (50리터) 405X345X480 50,000 (무용접)
15GL (60리터) 400*460 50,000 83,000
20GL (72리터) 470X425X480 60,000 (무용접)
20GL (80리터) 450*480 55,000 97,000
25GL (81리터) 460X435X520 66,000 (무용접)
25GL (100리터) 500*510 62,000 113,000
30GL (120리터) 550*510 70,000 132,000
40GL (150리터) 550*640 80,000 145,000
50GL (200리터) 635*640 100,000 218,000
60GL (220리터) 635*700 110,000 235,000
65GL (250리터) 635*800 120,000 273,000
100GL(400리터)776*800 (1.2T) 650,000
< 탈부착용 이동식 발통틀 단가표 >
* 이동식 발통틀 금액이며 용기는 별도 입니다
- 사이즈 - - A형식 - - B형식
지름 금 액
300mm( 20리터) 66,000 80,000
350mm( 40리터) 75,000 90,000
400mm( 60리터) 80,000 100,000
450mm( 80리터) 83,000 110,000
490mm(100리터) 89,000 120,000
550mm(120/150리터) 95,000 130,000
635mm(200/250/260) 108,000 140,000
776mm(400리터) 250,000
Food Container, Commercial Food Container, Stainless Steel Container, 27 Types of Food Only, SUS 304, Large Keg
Contact: Binary kitchen industry please contact 010-2662-3322
Food containers
Commercial food containers
Stainless containers
27 kinds of food-only
SUS 304
Large soup bucket
Cool
This stainless steel container order
1) Order from "Food", a food company located in Iksan, Jeollabuk-do
15GL (60L) Stainless 304 X 4
2 movable foot frames X for 15GL
Shipping: courier on behalf
2) Order from "* ki", a Tteok-roasting company located in Haeundae-gu, Busan
25GL (81L) Welded Can x 1
Further work: 20A stainless steel valve at bottom of side, plus elbow
Shipping: courier on behalf
Thank you for your order
Please use it conveniently
* Stainless container sales by size (201/304 / No welding)
* Sales of removable molds by size (made of stainless steel)
* Possible to request separate work on stainless container (hole work, valve installation, etc.)
* Please refer to the price list at the bottom
<Stainless steel container>
* Stainless steel container is 0.8T standard, and includes container and lid at the factory
* 1.2T 1.5T is made separately
* The diameter specified in the lower unit price table can not be changed and the height can be adjusted upon request
* Production period: 4-7 days (depends on production and stock status)
* Cash payment / card payment not possible
* Courier payment
<Removable foot pail>
* You can order the movable frame by selecting either A type or B type (made of stainless 4T).
* The wheels are equipped with a 4 inch swivel 2 + 4 inch BK 2
* If you apply it to your product, you can make it separately by letting us know the diameter of the lower part.
* Please note that the unit price is higher due to the separate processing cost when ordering separately.
* Production period: 4-5 days (depends on the production situation)
* Cash payment / card payment not possible
* Courier payment
* Please check the product immediately after delivery
* If any damage occurs that cannot be used after checking, please contact the shipper immediately.
* Damages occurred during delivery are not refundable or exchanged.
<Stainless steel container price list>
* Amount shown is the amount of stainless steel separately
* VAT not included
* Shipping charges separately (Additional fee will be charged upon request for additional work)
Capacity Diameter X Height Stainless Steel 201 Stainless Steel 304
3GL (12 liters) 250 * 265 28,000 42,000
5GL (20L) 320X285X300 33,000 (Welding)
5GL (20L) 300 * 300 32,000 53,000
8GL (28L) 350 * 330 38,000 60,000
10GL (37L) 370X335X390 40,000 (Welding)
10GL (40L) 350 * 380 40,000 68,000
15GL (50L) 405X345X480 50,000 (Welding)
15GL (60L) 400 * 460 50,000 83,000
20GL (72L) 470X425X480 60,000 (Welding)
20GL (80L) 450 * 480 55,000 97,000
25GL (81L) 460X435X520 66,000 (WEL)
25GL (100L) 500 * 510 62,000 113,000
30GL (120L) 550 * 510 70,000 132,000
40GL (150 liters) 550 * 640 80,000 145,000
50GL (200L) 635 * 640 100,000 218,000
60GL (220L) 635 * 700 110,000 235,000
65 GL (250 liters) 635 * 800 120,000 273,000
100 GL (400 liters) 776 * 800 (1.2T) 650,000
<Removable removable mold frame price list>
* The amount of removable buckets and containers are not included
-Size--Type A--Type B
Diameter
300 mm (20 liters) 66,000 80,000
350 mm (40 liters) 75,000 90,000
400 mm (60 liters) 80,000 100,000
450 mm (80 liters) 83,000 110,000
490 mm (100 liters) 89,000 120,000
550 mm (120/150 liters) 95,000 130,000
635 mm (200/250/260) 108,000 140,000
776 mm (400 liters) 250,000
문의 : 이진 주방 산업 010-2662-3322 로 문의 바랍니다
식품 용기
업소용 식품 용기
스테인레스 용기
식품 전용 27종
SUS 304
대형 국 통
식깡
이번 스테인레스 용기 주문은
1) 전라북도 익산시에 위치한 푸드업체인 "**푸드"에서 주문
15GL (60리터) 스테인레스 304 X 4대
15GL용 이동식 발통틀 X 2대
배송 : 대신 택배 착불
2) 부산광역시 해운대구에 위치한 떡볶기 전문 업체인 "*끼"에서 주문
25GL (81리터) 무용접 식깡 X 1대
추가 작업 : 옆면 최하단부에 20A 스텐 밸브 장착 + 앨보 장착 요청
배송 : 대신 택배 착불
주문해 주셔서 감사드립니다
편리하게 사용하시기 바랍니다
* 사이즈별 스테인레스 용기 판매 (201/304/무용접)
* 사이즈별 이동식 발통틀 판매 (스텐으로 제작)
* 스테인레스 용기에 별도 작업 요청 가능 (홀작업,밸브장착 등)
* 하단부에 단가표 참조 바랍니다
< 스테인레스 용기 >
* 스테인레스 용기는 0.8T가 기본 제작 되며 출고시 용기및 뚜껑포함입니다
* 1.2T 1.5T는 별도 제작
* 별도 사이즈 제작 요청시 하단부 단가표에 명시된 지름은 변경 불가이며 높이는 조절 가능합니다
* 제작 기간 : 4~7일정도 소요 ( 제작 상황 및 재고 상황에 따라 달라집니다
* 현금 결재 가능 / 카드 결재 불가
* 택배 착불
< 이동식 발통틀 >
* 이동식 발통틀은 A형식,B형식 중에 택하셔서 주문해 주시면 됩니다 (스텐 4T로 제작)
* 바퀴는 4인치 회전 2 + 4인치 BK 2 장착 됩니다
* 보유하고 계신 제품에 적용시는 하단부 외경 지름을 알려주시면 별도 제작 가능합니다
* 별도 제작 주문시 별도 가공비로 인해 단가가 높다는 점을 알려드립니다
* 제작 기간 : 4~5일 정도 소요 ( 제작 상황에 따라 달라집니다 )
* 현금 결재 가능 / 카드 결재 불가
* 택배 착불
* 택배 운송 완료후 즉시 제품 확인해 주시기 바랍니다
* 확인후 제품 사용이 불가능한 파손이 발생되면 즉시 배송업체에 연락하셔서 조치 하시기 바랍니다
* 배송중 발생되는 파손은 환불 및 교환 불가합니다
< 스테인레스 용기 단가표 >
* 표기된 금액은 스테인레스 용기 단품의 금액입니다
* 부가세 미포함
* 운송료 별도 ( 추가 작업 요청시 추가금 발생됩니다 )
용량 지름X높이 SUS 201 SUS 304
3GL (12리터) 250*265 28,000 42,000
5GL (20리터) 320X285X300 33,000 (무용접)
5GL (20리터) 300*300 32,000 53,000
8GL (28리터) 350*330 38,000 60,000
10GL (37리터) 370X335X390 40,000 (무용접)
10GL (40리터) 350*380 40,000 68,000
15GL (50리터) 405X345X480 50,000 (무용접)
15GL (60리터) 400*460 50,000 83,000
20GL (72리터) 470X425X480 60,000 (무용접)
20GL (80리터) 450*480 55,000 97,000
25GL (81리터) 460X435X520 66,000 (무용접)
25GL (100리터) 500*510 62,000 113,000
30GL (120리터) 550*510 70,000 132,000
40GL (150리터) 550*640 80,000 145,000
50GL (200리터) 635*640 100,000 218,000
60GL (220리터) 635*700 110,000 235,000
65GL (250리터) 635*800 120,000 273,000
100GL(400리터)776*800 (1.2T) 650,000
< 탈부착용 이동식 발통틀 단가표 >
* 이동식 발통틀 금액이며 용기는 별도 입니다
- 사이즈 - - A형식 - - B형식
지름 금 액
300mm( 20리터) 66,000 80,000
350mm( 40리터) 75,000 90,000
400mm( 60리터) 80,000 100,000
450mm( 80리터) 83,000 110,000
490mm(100리터) 89,000 120,000
550mm(120/150리터) 95,000 130,000
635mm(200/250/260) 108,000 140,000
776mm(400리터) 250,000
Food Container, Commercial Food Container, Stainless Steel Container, 27 Types of Food Only, SUS 304, Large Keg
Contact: Binary kitchen industry please contact 010-2662-3322
Food containers
Commercial food containers
Stainless containers
27 kinds of food-only
SUS 304
Large soup bucket
Cool
This stainless steel container order
1) Order from "Food", a food company located in Iksan, Jeollabuk-do
15GL (60L) Stainless 304 X 4
2 movable foot frames X for 15GL
Shipping: courier on behalf
2) Order from "* ki", a Tteok-roasting company located in Haeundae-gu, Busan
25GL (81L) Welded Can x 1
Further work: 20A stainless steel valve at bottom of side, plus elbow
Shipping: courier on behalf
Thank you for your order
Please use it conveniently
* Stainless container sales by size (201/304 / No welding)
* Sales of removable molds by size (made of stainless steel)
* Possible to request separate work on stainless container (hole work, valve installation, etc.)
* Please refer to the price list at the bottom
<Stainless steel container>
* Stainless steel container is 0.8T standard, and includes container and lid at the factory
* 1.2T 1.5T is made separately
* The diameter specified in the lower unit price table can not be changed and the height can be adjusted upon request
* Production period: 4-7 days (depends on production and stock status)
* Cash payment / card payment not possible
* Courier payment
<Removable foot pail>
* You can order the movable frame by selecting either A type or B type (made of stainless 4T).
* The wheels are equipped with a 4 inch swivel 2 + 4 inch BK 2
* If you apply it to your product, you can make it separately by letting us know the diameter of the lower part.
* Please note that the unit price is higher due to the separate processing cost when ordering separately.
* Production period: 4-5 days (depends on the production situation)
* Cash payment / card payment not possible
* Courier payment
* Please check the product immediately after delivery
* If any damage occurs that cannot be used after checking, please contact the shipper immediately.
* Damages occurred during delivery are not refundable or exchanged.
<Stainless steel container price list>
* Amount shown is the amount of stainless steel separately
* VAT not included
* Shipping charges separately (Additional fee will be charged upon request for additional work)
Capacity Diameter X Height Stainless Steel 201 Stainless Steel 304
3GL (12 liters) 250 * 265 28,000 42,000
5GL (20L) 320X285X300 33,000 (Welding)
5GL (20L) 300 * 300 32,000 53,000
8GL (28L) 350 * 330 38,000 60,000
10GL (37L) 370X335X390 40,000 (Welding)
10GL (40L) 350 * 380 40,000 68,000
15GL (50L) 405X345X480 50,000 (Welding)
15GL (60L) 400 * 460 50,000 83,000
20GL (72L) 470X425X480 60,000 (Welding)
20GL (80L) 450 * 480 55,000 97,000
25GL (81L) 460X435X520 66,000 (WEL)
25GL (100L) 500 * 510 62,000 113,000
30GL (120L) 550 * 510 70,000 132,000
40GL (150 liters) 550 * 640 80,000 145,000
50GL (200L) 635 * 640 100,000 218,000
60GL (220L) 635 * 700 110,000 235,000
65 GL (250 liters) 635 * 800 120,000 273,000
100 GL (400 liters) 776 * 800 (1.2T) 650,000
<Removable removable mold frame price list>
* The amount of removable buckets and containers are not included
-Size--Type A--Type B
Diameter
300 mm (20 liters) 66,000 80,000
350 mm (40 liters) 75,000 90,000
400 mm (60 liters) 80,000 100,000
450 mm (80 liters) 83,000 110,000
490 mm (100 liters) 89,000 120,000
550 mm (120/150 liters) 95,000 130,000
635 mm (200/250/260) 108,000 140,000
776 mm (400 liters) 250,000
2020년 1월 22일 수요일
식품 전용 스텐 용기 / 업소용 대형 국 통 / SUS 304 / 스테인레스 용기
식품 전용 스텐 용기 / 업소용 대형 국 통 / SUS 304 / 스테인레스 용기
문의 : 이진 주방 산업 010-2662-3322 로 문의 바랍니다
식품 전용 스텐 용기
업소용 대형 국 통
SUS 304
SUS 201
스테인레스 용기
이번 스테인레스 용기 주문은
1) 서울 마포구에 위치한 족발 전문 업체인 "**족발"에서 주문
40GL (201) X 2대
배송 : 대신 택배 착불
2) 경기도 성남시에 위치한 화장품 전문업체인 "*******코리아"에서 주문
무용접 식깡 (304) 으로 주문
10GL X 2대
15GL X 4대
배송 : 대신 택배 착불
3) 대전광역시 유성구에 위치한 업체서 주문
* 635mm 지름에 높이 조절 별도 제작 요청
635 X 380 (304) X1대 별도 제작
이동식 발통틀 635mm X1대
배송 : 대신 택배 착불
주문해 주셔서 감사드리며 편리하게 사용하시기 바랍니다
감사합니다
* SUS 201 / SUS 304 / 무용접 SUS 304 / 포개어지는 소도아
* 알루미늄 용기는 판매 하지 않습니다 ( 알루미늄 용기는 식품용도로 부적합 합니다 )
* SUS 201 과 SUS 304의 차이는 스텐 함유량의 차이 입니다 ( 부식의 진행에 대한 차이 )
* 단시간에 부식은 발생 되지 않으나 소금성분이 많거나 산성에는 부식이 더 빨리 진행 됩니다
* SUS 304 무용접 식깡은 304 재질은 맞으나 용접이 아닌 자동 생산 방식인 열처리 방식으로 인해 자성이 발생되며 두께가 다소 얇은 편입니다
* 무용접 식깡은 5GL (20리터) ~ 25GL (81리터) 까지만 제작 됩니다 ( 큰 사이즈의 용기는 무용접 제작 불가합니다 )
* 기본 0.8T로 제작 출고
* 400리터 용기는 1.2T로 제작 ( 제작 기간은 7~최대 15일 정도 소요 )
* 1.2T 1.5T 별도 주문 제작 가능 ( 제작 기간은 7~최대 15일 정도 소요 )
* 용기 자재 입고시 다소 제작이 지연될수 있습니다
* 하단부 단가표의 사이즈에서 지름은 변경 제작 불가하며 용기 높이는 조절 제작 가능합니다
* 용기 지름은 명시된 사이즈만 제작 가능하며 높이만 조절 제작 가능합니다
* 기본 출고 사항 : 용기 본체 + 용기 덮개 + 용기 양쪽 손잡이 부착
* 주문시 하단의 단가표를 참조하여 주문해 주시면 됩니다
* 하단 단가표에는 기본 스테인레스 용기 단가만 명시되어 있습니다
* 스텐 용기 외에 추가 작업 요청시 별도 금액 추가 됩니다
* 주문은 전화로 직접 주문 받으며 문자로도 주문 가능
* 팩스와 메일로 별도 주문 발주서를 작성하여 보내 주셔도 됩니다
* 용기외 추가 작업 요청시 작업 위치 및 작업 사항 ( 밸브 사이즈 명시 등 )을 정확히 말씀해 주셔야 합니다 ( 간단한 도면,도안,사진 보내주시면 빠른 작업 진행이 됩니다 )
* 팩스 (053) 627-3323 또는 2jineng@naver.com
< 추가 작업 가능 부분 > 용기에 용접 작업은 해드리지 않습니다
* 홀 작업 : 홀 사이즈에 따라 별도 금액 발생
* 탱크,소켓,밸브,앨보 장착 : ( 황동 / 스텐 중 선택 가능 ) 15A ~ 50A 까지 장착 가능
* 그외 세니타리,호스 니플 장착 가능
* 이동식 발통틀 : 두가지 형식 제작 ( 레이저 가공 A형식,각파이프 밴딩 B형식 )
* 추가 작업된 제품 배송시 발생되는 파손으로 인해 탱크 소켓까지만 장착되며 나머지 부품은 동봉해서 출고 됩니다 ( 테프론 테이프 동봉 발송 )
* 1대 부터 출고 가능
* 제작 기간 : 재고 및 작업 상황에 따라 다르며 보통 5~7일 정도 소요됩니다
* 주문후 즉시 출고 되지 않습니다
* 여러대 주문시 최대 10일~15일 정도 소요 될수도 있습니다 ( 작업 상황에 따라 다릅니다 )
* 운송 : 택배 착불 처리 ( 운송 업체에서 운송료 책정 )
* 여러대 주문시 전국 화물 단독 착불 처리 또는 합짐 착불 처리
* 제작 완료후 직접 운송해 가셔도 됩니다
* 운송 업체에서 제품을 수령후 즉시 확인해 주시기 바랍니다
* 파손으로 인해 사용 불가능할시 운송업체측에 연락하셔서 조치를 취하시기 바랍니다
* 운송중 발생되는 파손으로 인한 제품 손상시 저희 업체에서 배상해 드리지 않습니다
* 현금 결재만 가능 / 카드 결재 불가
* 부가세 별도 / 세금계산서 발행
< 스테인레스 용기 단가표 >
* 표기된 금액은 스테인레스 용기 단품의 금액입니다
* 부가세 미포함 ( 부가세 별도 )
* 운송료 별도 ( 착불처리 )
* 추가 작업 요청시 추가금 발생됩니다
용량 지름X높이 SUS 201 SUS 304
3GL (12리터) 250*265 28,000 42,000
5GL (20리터) 320X285X300 33,000 (무용접)
5GL (20리터) 300*300 32,000 53,000
8GL (28리터) 350*330 38,000 60,000
10GL (37리터) 370X335X390 40,000 (무용접)
10GL (40리터) 350*380 40,000 68,000
15GL (50리터) 405X345X480 50,000 (무용접)
15GL (60리터) 400*460 50,000 83,000
20GL (72리터) 470X425X480 60,000 (무용접)
20GL (80리터) 450*480 55,000 97,000
25GL (81리터) 460X435X520 66,000 (무용접)
25GL (100리터) 500*510 62,000 113,000
30GL (120리터) 550*510 70,000 132,000
40GL (150리터) 550*640 80,000 145,000
50GL (200리터) 635*640 100,000 218,000
60GL (220리터) 635*700 110,000 235,000
65GL (250리터) 635*800 120,000 273,000
100GL (400리터) 776*800 1.2T 650,000
* 포개어지는 소도와 145리터용 윗지름 776*밑지름 635* 높이 380 1.2T 360,000
< 탈 부착용 이동식 식깡 > 이동식 발통틀 금액이며 용기는 별도입니다
A형식 : 스텐을 레이저로 가공하여 제작
B형식 : 스텐 각파이프를 밴딩하여 제작
- 사이즈 - - A형식 - - B형식 -
지름 금 액
300mm( 20리터) 66,000 80,000
350mm( 40리터) 75,000 90,000
400mm( 60리터) 80,000 100,000
450mm( 80리터) 83,000 110,000
490mm(100리터) 89,000 120,000
550mm(120/150리터) 95,000 130,000
635mm(200/250/260) 108,000 140,000
776mm(400리터) 250,000
Food special stainless steel container / large bureau for business / SUS 304 / stainless steel container
Contact: Binary kitchen industry please contact 010-2662-3322
Stainless steel container for food
Commercial large bureau
SUS 304
SUS 201
Stainless containers
This stainless steel container order
1) Order from "Jukkbal", a jokbal specialist located in Mapo-gu, Seoul
40GL (201) X 2 units
Shipping: courier on behalf
2) Order from "******* Korea", a cosmetics company located in Seongnam, Gyeonggi-do
Order by Weldless Can (304)
10GL X 2 units
15GL X 4 units
Shipping: courier on behalf
3) Order from a company located in Yuseong-gu, Daejeon
* 635mm diameter height adjustment separately request
635 X 380 (304) X1
635mm X 1 movable foot frame
Shipping: courier on behalf
Thank you for your order and please use it conveniently.
Thank you
* SUS 201 / SUS 304 / No Welding SUS 304 / Sodaa Overlaid
* Aluminum containers are not sold (aluminum containers are not suitable for food)
* The difference between SUS 201 and SUS 304 is the difference in the contents of stainless steel (difference in the progress of corrosion)
* Corrosion does not occur in a short time, but corrosion is faster in a lot of salt or acid
* SUS 304 non-welding type can be made of 304 but magnetically generated due to heat treatment method, which is automatic production method, rather than welding, and its thickness is rather thin.
* Welded cans are made only from 5GL (20 liters) to 25GL (81 liters) (large size containers cannot be welded)
* Factory default 0.8T
* 400 liter container is made of 1.2T (production period takes 7 ~ 15 days)
* 1.2T 1.5T can be ordered separately (production period takes 7 ~ 15 days)
* Production may be delayed when receiving container materials
* The diameter of the lower unit price table cannot be changed and the height of the container can be adjusted.
* The diameter of the container can be manufactured only in the size specified and the height can be adjusted.
* Factory default: container body + container cover + container with both handles
* When ordering, please refer to the unit price table below.
* The lower price list only lists the basic stainless steel container price.
* In addition to the stainless steel container, additional amounts will be added upon request
* Orders can be ordered directly by phone or by letter
* You can send a separate order form by fax or e-mail.
* When requesting additional work outside the container, you must tell the work location and work matters (specify the valve size, etc.) (Please send simple drawings, drawings, and photos for quick work.)
* Fax (053) 627-3323 or 2jineng@naver.com
<More parts available> Weld on the container
* Hole work: A separate amount is generated depending on the hole size
* Tank, socket, valve, albo mounting: (Brass / stainless steel can be selected) 15A ~ 50A
* Other Senitari and Hose Nipples can be installed.
* Removable pail: Two types (Laser A type, Angle pipe banding B type)
* Due to the damage that occurs during the delivery of additional work, only the tank socket is mounted and the remaining parts are shipped with the Teflon tape included.
* Available from 1 unit
* Production period: It depends on stock and work situation, usually 5 ~ 7 days
* Not immediately after order
* It may take up to 10 ~ 15 days for multiple orders (depending on the work situation).
* Transportation: courier payment processing (shipping charges by the carrier)
* When multiple orders are processed, nationwide single payment or combined payment processing
* You can transport it directly after the production is completed.
* Please check immediately after receiving the goods from the shipping company
* If it is not available due to damage, please contact the shipping company.
* We do not reimburse for damages to the product caused by damages in transit.
* Only cash payment / card payment not accepted
* VAT not included / Tax Invoice
<Stainless steel container price list>
* Amount shown is the amount of stainless steel separately
* VAT not included (tax not included)
* Shipping charges separately (payment)
* Additional fee will be charged upon request
Capacity Diameter X Height Stainless Steel 201 Stainless Steel 304
3GL (12 liters) 250 * 265 28,000 42,000
5GL (20L) 320X285X300 33,000 (Welding)
5GL (20L) 300 * 300 32,000 53,000
8GL (28L) 350 * 330 38,000 60,000
10GL (37L) 370X335X390 40,000 (Welding)
10GL (40L) 350 * 380 40,000 68,000
15GL (50L) 405X345X480 50,000 (Welding)
15GL (60L) 400 * 460 50,000 83,000
20GL (72L) 470X425X480 60,000 (Welding)
20GL (80L) 450 * 480 55,000 97,000
25GL (81L) 460X435X520 66,000 (WEL)
25GL (100L) 500 * 510 62,000 113,000
30GL (120L) 550 * 510 70,000 132,000
40GL (150 liters) 550 * 640 80,000 145,000
50GL (200L) 635 * 640 100,000 218,000
60GL (220L) 635 * 700 110,000 235,000
65 GL (250 liters) 635 * 800 120,000 273,000
100GL (400L) 776 * 800 1.2T 650,000
* Overlap 776 * Top diameter 776 * Bottom diameter 635 * Height 380 1.2T 360,000
<Removable removable tin can> Amount of removable carton
Form A: Manufactured by laser processing stainless steel
Type B: Manufactured by banding stainless steel pipe
-Size--Type A--Type B-
Diameter
300 mm (20 liters) 66,000 80,000
350 mm (40 liters) 75,000 90,000
400 mm (60 liters) 80,000 100,000
450 mm (80 liters) 83,000 110,000
490 mm (100 liters) 89,000 120,000
550 mm (120/150 liters) 95,000 130,000
635 mm (200/250/260) 108,000 140,000
776 mm (400 liters) 250,000
문의 : 이진 주방 산업 010-2662-3322 로 문의 바랍니다
식품 전용 스텐 용기
업소용 대형 국 통
SUS 304
SUS 201
스테인레스 용기
이번 스테인레스 용기 주문은
1) 서울 마포구에 위치한 족발 전문 업체인 "**족발"에서 주문
40GL (201) X 2대
배송 : 대신 택배 착불
2) 경기도 성남시에 위치한 화장품 전문업체인 "*******코리아"에서 주문
무용접 식깡 (304) 으로 주문
10GL X 2대
15GL X 4대
배송 : 대신 택배 착불
3) 대전광역시 유성구에 위치한 업체서 주문
* 635mm 지름에 높이 조절 별도 제작 요청
635 X 380 (304) X1대 별도 제작
이동식 발통틀 635mm X1대
배송 : 대신 택배 착불
주문해 주셔서 감사드리며 편리하게 사용하시기 바랍니다
감사합니다
* SUS 201 / SUS 304 / 무용접 SUS 304 / 포개어지는 소도아
* 알루미늄 용기는 판매 하지 않습니다 ( 알루미늄 용기는 식품용도로 부적합 합니다 )
* SUS 201 과 SUS 304의 차이는 스텐 함유량의 차이 입니다 ( 부식의 진행에 대한 차이 )
* 단시간에 부식은 발생 되지 않으나 소금성분이 많거나 산성에는 부식이 더 빨리 진행 됩니다
* SUS 304 무용접 식깡은 304 재질은 맞으나 용접이 아닌 자동 생산 방식인 열처리 방식으로 인해 자성이 발생되며 두께가 다소 얇은 편입니다
* 무용접 식깡은 5GL (20리터) ~ 25GL (81리터) 까지만 제작 됩니다 ( 큰 사이즈의 용기는 무용접 제작 불가합니다 )
* 기본 0.8T로 제작 출고
* 400리터 용기는 1.2T로 제작 ( 제작 기간은 7~최대 15일 정도 소요 )
* 1.2T 1.5T 별도 주문 제작 가능 ( 제작 기간은 7~최대 15일 정도 소요 )
* 용기 자재 입고시 다소 제작이 지연될수 있습니다
* 하단부 단가표의 사이즈에서 지름은 변경 제작 불가하며 용기 높이는 조절 제작 가능합니다
* 용기 지름은 명시된 사이즈만 제작 가능하며 높이만 조절 제작 가능합니다
* 기본 출고 사항 : 용기 본체 + 용기 덮개 + 용기 양쪽 손잡이 부착
* 주문시 하단의 단가표를 참조하여 주문해 주시면 됩니다
* 하단 단가표에는 기본 스테인레스 용기 단가만 명시되어 있습니다
* 스텐 용기 외에 추가 작업 요청시 별도 금액 추가 됩니다
* 주문은 전화로 직접 주문 받으며 문자로도 주문 가능
* 팩스와 메일로 별도 주문 발주서를 작성하여 보내 주셔도 됩니다
* 용기외 추가 작업 요청시 작업 위치 및 작업 사항 ( 밸브 사이즈 명시 등 )을 정확히 말씀해 주셔야 합니다 ( 간단한 도면,도안,사진 보내주시면 빠른 작업 진행이 됩니다 )
* 팩스 (053) 627-3323 또는 2jineng@naver.com
< 추가 작업 가능 부분 > 용기에 용접 작업은 해드리지 않습니다
* 홀 작업 : 홀 사이즈에 따라 별도 금액 발생
* 탱크,소켓,밸브,앨보 장착 : ( 황동 / 스텐 중 선택 가능 ) 15A ~ 50A 까지 장착 가능
* 그외 세니타리,호스 니플 장착 가능
* 이동식 발통틀 : 두가지 형식 제작 ( 레이저 가공 A형식,각파이프 밴딩 B형식 )
* 추가 작업된 제품 배송시 발생되는 파손으로 인해 탱크 소켓까지만 장착되며 나머지 부품은 동봉해서 출고 됩니다 ( 테프론 테이프 동봉 발송 )
* 1대 부터 출고 가능
* 제작 기간 : 재고 및 작업 상황에 따라 다르며 보통 5~7일 정도 소요됩니다
* 주문후 즉시 출고 되지 않습니다
* 여러대 주문시 최대 10일~15일 정도 소요 될수도 있습니다 ( 작업 상황에 따라 다릅니다 )
* 운송 : 택배 착불 처리 ( 운송 업체에서 운송료 책정 )
* 여러대 주문시 전국 화물 단독 착불 처리 또는 합짐 착불 처리
* 제작 완료후 직접 운송해 가셔도 됩니다
* 운송 업체에서 제품을 수령후 즉시 확인해 주시기 바랍니다
* 파손으로 인해 사용 불가능할시 운송업체측에 연락하셔서 조치를 취하시기 바랍니다
* 운송중 발생되는 파손으로 인한 제품 손상시 저희 업체에서 배상해 드리지 않습니다
* 현금 결재만 가능 / 카드 결재 불가
* 부가세 별도 / 세금계산서 발행
< 스테인레스 용기 단가표 >
* 표기된 금액은 스테인레스 용기 단품의 금액입니다
* 부가세 미포함 ( 부가세 별도 )
* 운송료 별도 ( 착불처리 )
* 추가 작업 요청시 추가금 발생됩니다
용량 지름X높이 SUS 201 SUS 304
3GL (12리터) 250*265 28,000 42,000
5GL (20리터) 320X285X300 33,000 (무용접)
5GL (20리터) 300*300 32,000 53,000
8GL (28리터) 350*330 38,000 60,000
10GL (37리터) 370X335X390 40,000 (무용접)
10GL (40리터) 350*380 40,000 68,000
15GL (50리터) 405X345X480 50,000 (무용접)
15GL (60리터) 400*460 50,000 83,000
20GL (72리터) 470X425X480 60,000 (무용접)
20GL (80리터) 450*480 55,000 97,000
25GL (81리터) 460X435X520 66,000 (무용접)
25GL (100리터) 500*510 62,000 113,000
30GL (120리터) 550*510 70,000 132,000
40GL (150리터) 550*640 80,000 145,000
50GL (200리터) 635*640 100,000 218,000
60GL (220리터) 635*700 110,000 235,000
65GL (250리터) 635*800 120,000 273,000
100GL (400리터) 776*800 1.2T 650,000
* 포개어지는 소도와 145리터용 윗지름 776*밑지름 635* 높이 380 1.2T 360,000
< 탈 부착용 이동식 식깡 > 이동식 발통틀 금액이며 용기는 별도입니다
A형식 : 스텐을 레이저로 가공하여 제작
B형식 : 스텐 각파이프를 밴딩하여 제작
- 사이즈 - - A형식 - - B형식 -
지름 금 액
300mm( 20리터) 66,000 80,000
350mm( 40리터) 75,000 90,000
400mm( 60리터) 80,000 100,000
450mm( 80리터) 83,000 110,000
490mm(100리터) 89,000 120,000
550mm(120/150리터) 95,000 130,000
635mm(200/250/260) 108,000 140,000
776mm(400리터) 250,000
Food special stainless steel container / large bureau for business / SUS 304 / stainless steel container
Contact: Binary kitchen industry please contact 010-2662-3322
Stainless steel container for food
Commercial large bureau
SUS 304
SUS 201
Stainless containers
This stainless steel container order
1) Order from "Jukkbal", a jokbal specialist located in Mapo-gu, Seoul
40GL (201) X 2 units
Shipping: courier on behalf
2) Order from "******* Korea", a cosmetics company located in Seongnam, Gyeonggi-do
Order by Weldless Can (304)
10GL X 2 units
15GL X 4 units
Shipping: courier on behalf
3) Order from a company located in Yuseong-gu, Daejeon
* 635mm diameter height adjustment separately request
635 X 380 (304) X1
635mm X 1 movable foot frame
Shipping: courier on behalf
Thank you for your order and please use it conveniently.
Thank you
* SUS 201 / SUS 304 / No Welding SUS 304 / Sodaa Overlaid
* Aluminum containers are not sold (aluminum containers are not suitable for food)
* The difference between SUS 201 and SUS 304 is the difference in the contents of stainless steel (difference in the progress of corrosion)
* Corrosion does not occur in a short time, but corrosion is faster in a lot of salt or acid
* SUS 304 non-welding type can be made of 304 but magnetically generated due to heat treatment method, which is automatic production method, rather than welding, and its thickness is rather thin.
* Welded cans are made only from 5GL (20 liters) to 25GL (81 liters) (large size containers cannot be welded)
* Factory default 0.8T
* 400 liter container is made of 1.2T (production period takes 7 ~ 15 days)
* 1.2T 1.5T can be ordered separately (production period takes 7 ~ 15 days)
* Production may be delayed when receiving container materials
* The diameter of the lower unit price table cannot be changed and the height of the container can be adjusted.
* The diameter of the container can be manufactured only in the size specified and the height can be adjusted.
* Factory default: container body + container cover + container with both handles
* When ordering, please refer to the unit price table below.
* The lower price list only lists the basic stainless steel container price.
* In addition to the stainless steel container, additional amounts will be added upon request
* Orders can be ordered directly by phone or by letter
* You can send a separate order form by fax or e-mail.
* When requesting additional work outside the container, you must tell the work location and work matters (specify the valve size, etc.) (Please send simple drawings, drawings, and photos for quick work.)
* Fax (053) 627-3323 or 2jineng@naver.com
<More parts available> Weld on the container
* Hole work: A separate amount is generated depending on the hole size
* Tank, socket, valve, albo mounting: (Brass / stainless steel can be selected) 15A ~ 50A
* Other Senitari and Hose Nipples can be installed.
* Removable pail: Two types (Laser A type, Angle pipe banding B type)
* Due to the damage that occurs during the delivery of additional work, only the tank socket is mounted and the remaining parts are shipped with the Teflon tape included.
* Available from 1 unit
* Production period: It depends on stock and work situation, usually 5 ~ 7 days
* Not immediately after order
* It may take up to 10 ~ 15 days for multiple orders (depending on the work situation).
* Transportation: courier payment processing (shipping charges by the carrier)
* When multiple orders are processed, nationwide single payment or combined payment processing
* You can transport it directly after the production is completed.
* Please check immediately after receiving the goods from the shipping company
* If it is not available due to damage, please contact the shipping company.
* We do not reimburse for damages to the product caused by damages in transit.
* Only cash payment / card payment not accepted
* VAT not included / Tax Invoice
<Stainless steel container price list>
* Amount shown is the amount of stainless steel separately
* VAT not included (tax not included)
* Shipping charges separately (payment)
* Additional fee will be charged upon request
Capacity Diameter X Height Stainless Steel 201 Stainless Steel 304
3GL (12 liters) 250 * 265 28,000 42,000
5GL (20L) 320X285X300 33,000 (Welding)
5GL (20L) 300 * 300 32,000 53,000
8GL (28L) 350 * 330 38,000 60,000
10GL (37L) 370X335X390 40,000 (Welding)
10GL (40L) 350 * 380 40,000 68,000
15GL (50L) 405X345X480 50,000 (Welding)
15GL (60L) 400 * 460 50,000 83,000
20GL (72L) 470X425X480 60,000 (Welding)
20GL (80L) 450 * 480 55,000 97,000
25GL (81L) 460X435X520 66,000 (WEL)
25GL (100L) 500 * 510 62,000 113,000
30GL (120L) 550 * 510 70,000 132,000
40GL (150 liters) 550 * 640 80,000 145,000
50GL (200L) 635 * 640 100,000 218,000
60GL (220L) 635 * 700 110,000 235,000
65 GL (250 liters) 635 * 800 120,000 273,000
100GL (400L) 776 * 800 1.2T 650,000
* Overlap 776 * Top diameter 776 * Bottom diameter 635 * Height 380 1.2T 360,000
<Removable removable tin can> Amount of removable carton
Form A: Manufactured by laser processing stainless steel
Type B: Manufactured by banding stainless steel pipe
-Size--Type A--Type B-
Diameter
300 mm (20 liters) 66,000 80,000
350 mm (40 liters) 75,000 90,000
400 mm (60 liters) 80,000 100,000
450 mm (80 liters) 83,000 110,000
490 mm (100 liters) 89,000 120,000
550 mm (120/150 liters) 95,000 130,000
635 mm (200/250/260) 108,000 140,000
776 mm (400 liters) 250,000
2020년 1월 17일 금요일
반자동 라벨러 / 반자동 스티커 부착기 / 날짜 인자 가능 / 라벨 부착기 / 둥근 원형 용기 사용 ( 중국 수입산 )
반자동 라벨러 / 반자동 스티커 부착기 / 날짜 인자 가능 / 라벨 부착기 / 둥근 원형 용기 사용 ( 중국 수입산 )
문의 : 이진 주방 산업 010-2662-3322 로 문의 바랍니다
* 저희는 수입 대행만 해 드리며 AS는 해 드리지 않습니다
반자동 라벨러
반자동 스티커 부착기
날짜 인자 인쇄
라벨 부착기
둥근 원형 용기 사용 라벨러
* 중국산 기계 수입 대행 판매합니다
* 주문 요청에 의한 수입 대행 이므로 AS는 불가합니다
* 주문후 수입하는 방식입니다 ( 재고 없습니다 )
* 주문후 수입기간 : 20일 정도 소요
* 주문시 AS불가함을 반드시 고지 합니다
* 주문 요청시 사용하는 용기및 스티커를 저희에게 보내주셔야 가능여부를 정확히 알수 있습니다
- 하단 사진상의 라벨러 -
병 사이즈 : 10 ~150mm 까지 가능
태그 너비 : 8~150mm
태그 길이 : 15~315mm
효율 : 25~50 조각 / 분
전원 : 220V 50HZ
모터 전원 : 120W
기계 사이즈 : 650*450*450mm
무게 : 25KG
* 부가세 별도 / 세금계산서 발행
* 현금 결재만 가능 / 카드 결재 불가
* 배송 : 전국 화물 합짐 ( 착불 ) 처리 또는 제품 입고후 직접 오셔서 가져가셔도 됩니다
* 배송비는 반드시 착불 처리 됩니다
* 제품 입고후 작동 가능 테스트 확인후 출고 처리 됩니다
* 장착된 먹지 소진시에는 별도 먹지 구입하셔야 합니다
* 저희는 먹지는 판매 하지 않습니다
Semi-automatic labeler / Semi-automatic sticker applicator / Date imprintable / Label applicator / Using round round container (Imported from China)
Contact: Binary kitchen industry please contact 010-2662-3322
* We only provide import agent, not AS
Semi-automatic labeler
Semi-automatic sticker applicator
Date printing
Label applicator
Round Round Container Used Labeler
* We will sell imported machinery from China
* AS is not available because the import agent by order request
* Imported after ordering (out of stock)
* Import period after order: 20 days
* Please note that AS is not available when ordering
-Labeler on bottom photo-
Bottle Size: Available up to 10 ~ 150mm
Tag Width: 8 ~ 150mm
Tag Length: 15 ~ 315mm
Efficiency: 25-50 pieces / min
Power source: 220V 50HZ
Motor power: 120W
Machine size: 650 * 450 * 450mm
Weight: 25KG
* VAT not included / Tax Invoice
* Cash payment only / credit card not accepted
* Delivery: You can bring your own baggage after payment or payment.
* Shipping will be deferred
* After receiving the product, it will be processed after confirming the test that can be operated.
* If you do not eat the equipped food, you must buy it separately.
* We do not sell eat
문의 : 이진 주방 산업 010-2662-3322 로 문의 바랍니다
* 저희는 수입 대행만 해 드리며 AS는 해 드리지 않습니다
반자동 라벨러
반자동 스티커 부착기
날짜 인자 인쇄
라벨 부착기
둥근 원형 용기 사용 라벨러
* 중국산 기계 수입 대행 판매합니다
* 주문 요청에 의한 수입 대행 이므로 AS는 불가합니다
* 주문후 수입하는 방식입니다 ( 재고 없습니다 )
* 주문후 수입기간 : 20일 정도 소요
* 주문시 AS불가함을 반드시 고지 합니다
* 주문 요청시 사용하는 용기및 스티커를 저희에게 보내주셔야 가능여부를 정확히 알수 있습니다
- 하단 사진상의 라벨러 -
병 사이즈 : 10 ~150mm 까지 가능
태그 너비 : 8~150mm
태그 길이 : 15~315mm
효율 : 25~50 조각 / 분
전원 : 220V 50HZ
모터 전원 : 120W
기계 사이즈 : 650*450*450mm
무게 : 25KG
* 부가세 별도 / 세금계산서 발행
* 현금 결재만 가능 / 카드 결재 불가
* 배송 : 전국 화물 합짐 ( 착불 ) 처리 또는 제품 입고후 직접 오셔서 가져가셔도 됩니다
* 배송비는 반드시 착불 처리 됩니다
* 제품 입고후 작동 가능 테스트 확인후 출고 처리 됩니다
* 장착된 먹지 소진시에는 별도 먹지 구입하셔야 합니다
* 저희는 먹지는 판매 하지 않습니다
Semi-automatic labeler / Semi-automatic sticker applicator / Date imprintable / Label applicator / Using round round container (Imported from China)
Contact: Binary kitchen industry please contact 010-2662-3322
* We only provide import agent, not AS
Semi-automatic labeler
Semi-automatic sticker applicator
Date printing
Label applicator
Round Round Container Used Labeler
* We will sell imported machinery from China
* AS is not available because the import agent by order request
* Imported after ordering (out of stock)
* Import period after order: 20 days
* Please note that AS is not available when ordering
-Labeler on bottom photo-
Bottle Size: Available up to 10 ~ 150mm
Tag Width: 8 ~ 150mm
Tag Length: 15 ~ 315mm
Efficiency: 25-50 pieces / min
Power source: 220V 50HZ
Motor power: 120W
Machine size: 650 * 450 * 450mm
Weight: 25KG
* VAT not included / Tax Invoice
* Cash payment only / credit card not accepted
* Delivery: You can bring your own baggage after payment or payment.
* Shipping will be deferred
* After receiving the product, it will be processed after confirming the test that can be operated.
* If you do not eat the equipped food, you must buy it separately.
* We do not sell eat
2020년 1월 15일 수요일
액상 이동식 저장 용기 / 이동식 발통틀 / 운반용 스텐 발통틀 / 식깡 / 국통 / 드럼통 이동
액상 이동식 저장 용기 / 이동식 발통틀 / 운반용 스텐 발통틀 / 식깡 / 국통 / 드럼통 이동
문의 : 이진 주방 산업 010-2662-3322 로 문의 바랍니다
이동식 액상 저장 용기
이동식 발통틀
운반용 스텐 발통틀
식깡
국통
드럼통
이번 이동식 발통틀 제작은
1) 경상북도 경산시에 위치한 화장품 및 디퓨저,오일 제조업체인 "****뷰티"에서 주문
* 소량용기 충진용 액상 충진기
* 용기 투입 이송기
* 용기 배출 이송기
* 60리터 스테인레스 304용기 + 하단부 용기 이송 (액상 이송) X 2대
* 420 mm 이동식 발통틀 X 5대 ( 별도 주문 )
* 이동식 발통틀에 3인치 BK 바퀴 장착 요청
운송 : 직접 운송해 가셨습니다
2) 경기도 부천시에 위치한 식품제조업체인 "**푸드"에서
일전에 스테인레스 304 용기를 주문후 이동식 발통틀만 추가 주문
* 635mm 이동식 발통틀 X 6대 주문
* 4인치 회전 2 + 4인치 BK 2 장착
운송 : 택배 착불 처리
주문해 주셔서 감사드리며 편리하게 사용하시기 바랍니다
* 스테인레스 용기도 별도 판매 됩니다 ( SUS 201/ SUS 304 / 무용접 식깡)
* 이동식 발통틀 주문은 A형식 (레이저 가공) / B형식 (각파이프 밴딩) 중 선택하여 주문해 주시면 됩니다
* 하단부 단가표에 명시된 사이즈 외의 이동식 발통틀도 제작 가능합니다
* 제작 요청시 외경 사이즈를 알려주시면 됩니다
* ( 별도 제작 ) 기존에 없던 사이즈 제작 주문시 별도의 가공비로 인해 단가가 높다는 점을 알려드립니다
* 기본 바퀴 장착 : 4인치 회전 2 + 4인치 BK 2 장착
< 이동식 발통틀 >
1) 레이저 형식 ( A형식 ) : B형식 보다는 저렴합니다
4T 스텐을 레이저로 가공하여 제작
2) 밴딩 형식 ( B형식 ) : 스텐 각파이프를 밴딩 가공하여 제작
* 제작 : 입금 확인 후 제작 발주 처리가 됩니다
* 제작 기간 : 5~7일 정도 소요 ( 제작 상황에 따라 달라집니다 )
* 현금 결재만 가능 / 카드 결재 불가
* 부가세 별도 / 세금계산서 발행
* 운송 : 택배,화물 착불처리
* 제작 완료후 직접 오셔서 운송해 가셔도 됩니다
* 여러대 주문시 전국화물 처리됩니다 (착불)
* 운송료는 착불 처리 됩니다 ( 택배 업체및 화물 업체에서 운송료가 책정됩니다 )
* 운송 완료후 즉시 제품 확인 하시기 바랍니다
* 운송도중 발생한 파손 으로 인해 사용 불가능한 제품은 제품 수령 즉시 확인후 배송 업체에 연락하셔서 조치 하시기 바랍니다 ( 저희들이 처리해 주지 않습니다 )
< 탈부착용 이동식 발통틀 단가표 >
* 이동식 발통틀 금액이며 용기는 별도 입니다
- 사이즈 - - A형식 - - B형식
지름 금 액
300mm( 20리터) 66,000 80,000
350mm( 40리터) 75,000 90,000
400mm( 60리터) 80,000 100,000
450mm( 80리터) 83,000 110,000
490mm(100리터) 89,000 120,000
550mm(120/150리터) 95,000 130,000
635mm(200/250/260) 108,000 140,000
776mm(400리터) 250,000
< 스테인레스 용기 단가표 >
* 표기된 금액은 스테인레스 용기 단품의 금액입니다
* 부가세 미포함
* 운송료 별도 ( 추가 작업 요청시 추가금 발생됩니다 )
용량 지름X높이 SUS 201 SUS 304
3GL (12리터) 250*265 28,000 42,000
5GL (20리터) 320X285X300 33,000 (무용접)
5GL (20리터) 300*300 32,000 53,000
8GL (28리터) 350*330 38,000 60,000
10GL (37리터) 370X335X390 40,000 (무용접)
10GL (40리터) 350*380 40,000 68,000
15GL (50리터) 405X345X480 50,000 (무용접)
15GL (60리터) 400*460 50,000 83,000
20GL (72리터) 470X425X480 60,000 (무용접)
20GL (80리터) 450*480 55,000 97,000
25GL (81리터) 460X435X520 66,000 (무용접)
25GL (100리터) 500*510 62,000 113,000
30GL (120리터) 550*510 70,000 132,000
40GL (150리터) 550*640 80,000 145,000
50GL (200리터) 635*640 100,000 218,000
60GL (220리터) 635*700 110,000 235,000
65GL (250리터) 635*800 120,000 273,000
100GL(400리터)776*800 (1.2T) 650,000
Liquid portable storage container / removable bottle / moving stainless steel bottle / cooler / bucket / drum
Contact: Binary kitchen industry please contact 010-2662-3322
Removable liquid storage container
Removable footsteps
Carrying Stainless Steel Frame
Cool
National
Drum
This portable foot frame production
1) Order from "**** Beauty", a manufacturer of cosmetics, diffusers and oils located in Gyeongsan, North Gyeongsang Province.
* Liquid filling machine for filling small volume containers
* Container feeder
Container discharge feeder
* 60 liter stainless 304 container + lower container transfer (liquid transfer) X 2 units
* 420 mm movable foot frame X 5 units (order separately)
* Request to install 3 inch BK wheels on a removable pail
Transportation: You have shipped directly
2) From "Food", a food manufacturer located in Bucheon, Gyeonggi-do
Ordered the 304 stainless steel container and added only the removable mold
* 6 x 635mm movable foot frame
* 4 inch swivel 2 + 4 inch BK 2 mounted
Transportation: courier debit processing
Thank you for your order and please use it conveniently.
* Stainless steel container also sold separately (SUS 201 / SUS 304 / non-welding type)
* If you want to order the movable frame, please choose A type (laser processing) / B type (angle pipe banding) to order.
* It is also possible to manufacture removable molds other than the size specified in the lower price list.
* Please let us know the outer diameter size
* (Order separately) Please note that the unit price is higher due to the extra processing cost when ordering the previously made size.
* Standard wheel mounting: 4 inch swivel 2 + 4 inch BK 2
<Removable foot pail>
1) Laser Type (Type A): Cheaper than Type B
Manufactured by laser processing 4T stainless steel
2) Bending type (B type): Manufactured by bending the square pipes
* Production: Production orders will be processed after payment is confirmed.
* Production period: 5-7 days (depends on the production situation)
* Cash payment only / credit card not accepted
* VAT not included / Tax Invoice
* Transportation: courier service, freight handling
* You can come by yourself after the completion of production
* Cargo will be handled nationwide when ordering multiple items (Payment)
* Shipping charges will be deducted (the shipping charge will be set by the courier and freight company)
* Please check the product immediately after shipping.
* Please check the product immediately after receipt of the product if you cannot use the product due to the damage that occurred during transportation.
<Removable removable mold frame price list>
* The amount of removable buckets and containers are not included
-Size--Type A--Type B
Diameter
300 mm (20 liters) 66,000 80,000
350 mm (40 liters) 75,000 90,000
400 mm (60 liters) 80,000 100,000
450 mm (80 liters) 83,000 110,000
490 mm (100 liters) 89,000 120,000
550 mm (120/150 liters) 95,000 130,000
635 mm (200/250/260) 108,000 140,000
776 mm (400 liters) 250,000
<Stainless steel container price list>
* Amount shown is the amount of stainless steel separately
* VAT not included
* Shipping charges separately (Additional fee will be charged when requesting additional work)
Capacity Diameter X Height Stainless Steel 201 Stainless Steel 304
3GL (12 liters) 250 * 265 28,000 42,000
5GL (20L) 320X285X300 33,000 (Welding)
5GL (20L) 300 * 300 32,000 53,000
8GL (28L) 350 * 330 38,000 60,000
10GL (37L) 370X335X390 40,000 (Welding)
10GL (40L) 350 * 380 40,000 68,000
15GL (50L) 405X345X480 50,000 (Welding)
15GL (60L) 400 * 460 50,000 83,000
20GL (72L) 470X425X480 60,000 (Welding)
20GL (80L) 450 * 480 55,000 97,000
25GL (81L) 460X435X520 66,000 (WELDER)
25GL (100L) 500 * 510 62,000 113,000
30GL (120 liters) 550 * 510 70,000 132,000
40GL (150 liters) 550 * 640 80,000 145,000
50GL (200L) 635 * 640 100,000 218,000
60GL (220L) 635 * 700 110,000 235,000
65 GL (250 liters) 635 * 800 120,000 273,000
100 GL (400 liters) 776 * 800 (1.2T) 650,000
잉크젯 날인기 / 컨베이어에 장착후 출고 / 마킹기 / 자동 날인기 / 제조일자 날인기 / 날짜 날인기
잉크젯 날인기 / 컨베이어에 장착후 출고 / 마킹기 / 자동 날인기 / 제조일자 날인기 / 날짜 날인기
문의 : 이진 주방 산업 010-2662-3322 로 문의 바랍니다
잉크젯 날인기
컨베이어 별도 제작
컨베이어에 잉크젯 날인기 장착
마킹기
자동 날인기
제조일자 날인기
날짜 날인기
유통기한 날인기
이번 잉크젯 날인기 + 컨베이어 제작 주문은
항상 저희 업체를 이용해 주시는
대구광역시 서구에 위치한 식품 제조 업체인 "푸드*/***디"에서 주문
분말 충진기 4대 ,알약 충진기,라벨러에 이어 잉크젯 날인기와 컨베이어도 주문해 주셨습니다
운송 : 같은 대구 지역이여서 직접 운송해 가셨습니다
< 잉크젯 날인기 > - 국내산
* 노즐 내장카트리지,유지보수 필요 없는 고해상도
* 해상도 : 300DPI ~600DPI (Max)
* 인쇄 속도 : 최대 100M/M
* 인쇄 높이 : 12.5mm
* 잉크 타입 : 카트리지 방식
* 통신 기능 : USB 또는 RS-232
* 공급 전원 : 단상 110~220V 50~60Hz 자동 전원
* LCD 포함
* 서비스 품목 : 제품 감지 센서,운영메뉴얼,클리닝 카트
* 잉크 카트리지 : 포함 (출고시)
< 컨베이어 > - 자체제작
* 150mm X 1500mm 높이 730mm
* 4인치 브레이크 바퀴 장착
* 용기 가이드
* 컨베이어 속도 조절 가능
* 현금 결재 / 카드 결재 불가
* 부가세 별도 / 세금계산서 발행 가능
* 운송료는 착불 처리 됩니다
< 제작 가능한 제품 >
* 액상 충진기 ( 수입 / 자체 제작 : 자동,반자동 )
* 용기 이송기 ( 자체 제작 )
* 캡핑기 ( 자체 제작 : 자동,반자동 )
* 뚜껑 이송기 ( 자체 제작 )
* 액상 혼합기,교반기 ( 자체 제작 )
* 분말 충진기 ( 수입 / 자체 제작 )
* 분말 혼합기 ( 자체 제작 : 360도 통돌이 혼합기 국내 유일 제작 제품 )
* 컨베이어 제작 ( 자체 제작 )
* 수동 라벨기 / 반자동 라벨기 / 자동 라벨기 ( 수입 )
* 잉크젯 프린터 레이저 라벨기 ( 국산 )
* 알약 충진기 ( 수입 )
* 스테인레스 용기 제작 및 판매 ( 304/201/식깡/소도와/무용접식깡/포개어지는 소도와등 )
* 이동식 발통틀 ( 자체 제작 : 드럼통,식깡 등을 운반 )
* 스텐 대차 ( 자체 제작 )
Inkjet stamper / Factory release on the conveyor / Marker / Automatic stamper / Date stamper / Date stamper
Contact: Binary kitchen industry please contact 010-2662-3322
Inkjet sealer
Conveyor separately manufactured
Inkjet Imprinter Mounted on Conveyor
Marker
Automatic stamper
Date of manufacture
Date stamper
Expiration date stamp
This inkjet stamper + conveyor production order
You always use our company
Order from "Food * / *** D", a food manufacturer located in Seo-gu, Daegu
We ordered inkjet sealers and conveyors, followed by 4 powder filling machines, pill filling machines, and labellers.
Transportation: We transported directly to Daegu
<Inkjet Sealer>
* Nozzle cartridge, high resolution without maintenance
* Resolution: 300DPI ~ 600DPI (Max)
* Print Speed: Up to 100M / M
* Print Height: 12.5mm
Ink type: cartridge method
Communication function: USB or RS-232
* Power Supply: Single Phase 110 ~ 220V 50 ~ 60Hz Auto Power
* LCD included
* Service item: Product detection sensor, operation manual, cleaning cart
* Ink Cartridge: Included (factory)
<Conveyor>
* 150mm X 1500mm Height 730mm
4 inch brake wheels
* Container guide
* Conveyor Speed Adjustable
* Cash payment / credit card not accepted
* Tax-included / Tax invoice can be issued
* Shipping charges will be deducted
<Productable product>
* Liquid Filling Machine (Imported / Self-made: Automatic, Semi-automatic)
* Container transfer machine (self-made)
* Capping machine (self-made: automatic, semi-automatic)
* Lid transporter (self-made)
* Liquid Mixer, Agitator (Self-made)
* Powder Filling Machine (imported / self-made)
* Powder Mixer (Self-made: 360 Degree Outflow Mixer)
* Conveyor Production
* Manual labeling machine / semi-automatic labeling machine / automatic labeling machine (imported)
* Inkjet printer laser labeling machine (domestic)
* Pill Filler (Import)
* Stainless steel container production and sale (304/201 / food cans / soda / non-welding cans / nested soda etc.)
* Removable pail (self-made: carries drum, food can, etc.)
* Stainless steel bogie (self-made)
문의 : 이진 주방 산업 010-2662-3322 로 문의 바랍니다
잉크젯 날인기
컨베이어 별도 제작
컨베이어에 잉크젯 날인기 장착
마킹기
자동 날인기
제조일자 날인기
날짜 날인기
유통기한 날인기
이번 잉크젯 날인기 + 컨베이어 제작 주문은
항상 저희 업체를 이용해 주시는
대구광역시 서구에 위치한 식품 제조 업체인 "푸드*/***디"에서 주문
분말 충진기 4대 ,알약 충진기,라벨러에 이어 잉크젯 날인기와 컨베이어도 주문해 주셨습니다
운송 : 같은 대구 지역이여서 직접 운송해 가셨습니다
< 잉크젯 날인기 > - 국내산
* 노즐 내장카트리지,유지보수 필요 없는 고해상도
* 해상도 : 300DPI ~600DPI (Max)
* 인쇄 속도 : 최대 100M/M
* 인쇄 높이 : 12.5mm
* 잉크 타입 : 카트리지 방식
* 통신 기능 : USB 또는 RS-232
* 공급 전원 : 단상 110~220V 50~60Hz 자동 전원
* LCD 포함
* 서비스 품목 : 제품 감지 센서,운영메뉴얼,클리닝 카트
* 잉크 카트리지 : 포함 (출고시)
< 컨베이어 > - 자체제작
* 150mm X 1500mm 높이 730mm
* 4인치 브레이크 바퀴 장착
* 용기 가이드
* 컨베이어 속도 조절 가능
* 현금 결재 / 카드 결재 불가
* 부가세 별도 / 세금계산서 발행 가능
* 운송료는 착불 처리 됩니다
< 제작 가능한 제품 >
* 액상 충진기 ( 수입 / 자체 제작 : 자동,반자동 )
* 용기 이송기 ( 자체 제작 )
* 캡핑기 ( 자체 제작 : 자동,반자동 )
* 뚜껑 이송기 ( 자체 제작 )
* 액상 혼합기,교반기 ( 자체 제작 )
* 분말 충진기 ( 수입 / 자체 제작 )
* 분말 혼합기 ( 자체 제작 : 360도 통돌이 혼합기 국내 유일 제작 제품 )
* 컨베이어 제작 ( 자체 제작 )
* 수동 라벨기 / 반자동 라벨기 / 자동 라벨기 ( 수입 )
* 잉크젯 프린터 레이저 라벨기 ( 국산 )
* 알약 충진기 ( 수입 )
* 스테인레스 용기 제작 및 판매 ( 304/201/식깡/소도와/무용접식깡/포개어지는 소도와등 )
* 이동식 발통틀 ( 자체 제작 : 드럼통,식깡 등을 운반 )
* 스텐 대차 ( 자체 제작 )
Inkjet stamper / Factory release on the conveyor / Marker / Automatic stamper / Date stamper / Date stamper
Contact: Binary kitchen industry please contact 010-2662-3322
Inkjet sealer
Conveyor separately manufactured
Inkjet Imprinter Mounted on Conveyor
Marker
Automatic stamper
Date of manufacture
Date stamper
Expiration date stamp
This inkjet stamper + conveyor production order
You always use our company
Order from "Food * / *** D", a food manufacturer located in Seo-gu, Daegu
We ordered inkjet sealers and conveyors, followed by 4 powder filling machines, pill filling machines, and labellers.
Transportation: We transported directly to Daegu
<Inkjet Sealer>
* Nozzle cartridge, high resolution without maintenance
* Resolution: 300DPI ~ 600DPI (Max)
* Print Speed: Up to 100M / M
* Print Height: 12.5mm
Ink type: cartridge method
Communication function: USB or RS-232
* Power Supply: Single Phase 110 ~ 220V 50 ~ 60Hz Auto Power
* LCD included
* Service item: Product detection sensor, operation manual, cleaning cart
* Ink Cartridge: Included (factory)
<Conveyor>
* 150mm X 1500mm Height 730mm
4 inch brake wheels
* Container guide
* Conveyor Speed Adjustable
* Cash payment / credit card not accepted
* Tax-included / Tax invoice can be issued
* Shipping charges will be deducted
<Productable product>
* Liquid Filling Machine (Imported / Self-made: Automatic, Semi-automatic)
* Container transfer machine (self-made)
* Capping machine (self-made: automatic, semi-automatic)
* Lid transporter (self-made)
* Liquid Mixer, Agitator (Self-made)
* Powder Filling Machine (imported / self-made)
* Powder Mixer (Self-made: 360 Degree Outflow Mixer)
* Conveyor Production
* Manual labeling machine / semi-automatic labeling machine / automatic labeling machine (imported)
* Inkjet printer laser labeling machine (domestic)
* Pill Filler (Import)
* Stainless steel container production and sale (304/201 / food cans / soda / non-welding cans / nested soda etc.)
* Removable pail (self-made: carries drum, food can, etc.)
* Stainless steel bogie (self-made)
피드 구독하기:
글 (Atom)
















































